If you’re searching for painters in West Valley City, your house probably falls on one side or the other of a line through the middle of town. East of it, in the old Granger, Chesterfield and Redwood neighborhoods, are 1960s and 70s ramblers and split-levels with brick fronts and aluminum, wood or hardboard siding. West of it, in Hunter and the subdivisions built after the city incorporated in 1980, you find 1990s and 2000s two-stories in stucco and fiber cement.
Oasis Painters works across the valley from our shop in South Salt Lake, straight out 3300 South. We know both kinds of house.
West Valley City is Utah’s second-largest city, and nearly a quarter of its homes were built in the 1970s, the biggest single decade. The median year built is around 1985. That older east-side stock went up before the city existed, often without curb and gutter, and the exteriors reflect the era: brick wainscot or brick front, then aluminum lap siding, T1-11 or hardboard above, with wood soffits and fascia.
The west side is a different animal. After incorporation the city tightened its masonry and architectural standards, and the 1990s and 2000s homes near 5600 West and Bangerter are mostly stucco with stone or fiber-cement accents. Stucco needs breathable paint, hairline-crack patching and a spray-and-back-roll application; hardboard needs scraping, priming and sometimes replacement. We quote each house for what it is.
Many west-side owners are facing their first repaint on stucco, and it’s a different job from painting wood. We wash at low pressure so we don’t erode the finish, patch hairline cracks and let them cure, and prime the patches and any bare spots with a masonry primer. Then we spray two coats of 100% acrylic and back-roll each one so the paint works into the texture instead of bridging over it.
We generally steer owners away from full elastomeric coatings unless the stucco is cracking badly or taking water. Elastomeric seals the wall so tightly it can trap moisture, and once it’s on, everything after it has to be elastomeric too. For most West Valley stucco, breathable acrylic is the right call. Our exterior painting page explains the full sequence, and the gallery shows recent results.
The valley floor around 4,300 feet averages a 94°F July high, with about 56 days a year at 90 or above and a July UV index near 10. January lows average 24°F and the area sees roughly 52 inches of snow. Daily swings of 30 degrees are common, and that expansion and contraction is what opens caulk joints and lifts paint off south- and west-facing walls first.
West Valley’s wide, newer streets offer less shade than the old east-bench neighborhoods, so sun exposure is intense. On 70s-era hardboard, a failing paint film at the bottom edge of each board is where water gets in and the board swells. Catching that early saves real money. Our exterior painting guide covers timing; the window here runs mid-April through late October.
Thinking about a project in West Valley City? Get a clear, written proposal from a local crew.
We are locally owned and operated, not a franchise, and we treat west-side homeowners the same way we treat anyone on the east bench. In practice:
The free consultation comes first. We look at every wall and soffit, talk about colors that will hold up on your sunniest elevation, and give you a written proposal that lists surfaces, products, coats and repairs.
On the job, the crew washes and lets the house dry, scrapes and sands, repairs wood, primes, caulks, masks and paints. Landscaping, concrete and your neighbor’s car get covered. We finish with a walk-through where you point at anything you want touched up.
Inside, many West Valley homes are ready for a brighter palette, and our interior painting crew handles that year-round. We also serve nearby Taylorsville and the rest of the west valley.
Yes. Stucco repaints are a regular part of our West Valley work. We wash it gently, patch hairline cracks, prime repairs and spray two back-rolled coats of breathable acrylic. Elastomeric is reserved for stucco that’s cracking badly.
Swollen hardboard can’t be fixed with paint. We replace the failed boards, prime everything bare, re-caulk and then paint the whole wall so the repair disappears. Catching it early keeps costs down.
July and August are workable but we chase the shade, starting on the east and north sides and moving around the house. Paint applied to a wall baking in afternoon sun dries too fast and can lap or peel.
We help. For the newer west-side communities with design review, we provide color samples and product information for your submittal, and we hold the start date until approval comes back.
We do. Central West Valley around 3500 South and Constitution Boulevard mixes 1960s to 80s homes with newer townhomes, and we serve all of it, along with Granger, Hunter, Chesterfield and the west side.
Set up a free consultation and we’ll tell you exactly what your West Valley home needs before the first can is opened.